Hi all from Jurong Lakeside

by exoskeletal on Sun 28 Jul 2013 - 14:00

Hi all,

just bought a Tamiya Tundra HL..hope to meet up with u guys and learn more abt RC from everybody!

Chriz

by Liew on Sun 28 Jul 2013 - 15:10

Welcome

by exoskeletal on Sun 28 Jul 2013 - 15:16

hi bro,

thanks! am still in the midst of building it up..but also looking for parts to mod!! Twisted Evil

by Sabretooth_aw on Sun 28 Jul 2013 - 15:48

Hi, i from jurong lakeside too!!! Want go trail at chinese garden?? Laughing

by exoskeletal on Sun 28 Jul 2013 - 15:55

When my truck done I dun mind man!! Its meant to be dirty anyway!!

by boolean21 on Sun 28 Jul 2013 - 15:56

Welcome on board chriz...

post your build thread! Smile

by exoskeletal on Sun 28 Jul 2013 - 22:44

haa..still a newbie bro..anyway my build is totally stock..nothing differs from the standard Tundra HL..

Btw, can ask noob question. I've seen from youtube you guys really trash ur trucks in the jungle, do I need to do any prep before I trash mine too? Like waterproofing or some special sealant around the electric parts or motor?

by boolean21 on Mon 29 Jul 2013 - 1:15

Newbie also can post build thread ma... no worries...
me newbie too... Very Happy

the old birds will guide us...

good thing about build threads is that the old birds will see and point out any issues or suggestions while we are building the kit... Smile

Yes... u will need to waterproof your electronics. ... e.g. rx.. esc.. and lipo....

And also marine grease your gears too....

by exoskeletal on Mon 29 Jul 2013 - 22:48

Oops marine grease? My truck nearing completion liao leh...shit.. How to waterproof those electronics ah? Seal up everything?

by **oceanic** on Tue 30 Jul 2013 - 8:47

welcome to SGC bro.
get some idea from this post, http://sgcrawlers.forumotion.com/t1026-how-to-how-to-waterproof-brushed-esc-and-rc-electronics

u can balloon up your receiver, after the rx is in the balloon, wrap the balloon neck around the wires and double cable tie it. that's how most of us did.

by babyboy on Tue 30 Jul 2013 - 10:31

It's good to do water proffing before you do your first trail. Dun wait till some rust than do water proffing. It's a very painful experience. Gears and bearings is very important. I used marine grease and it's holding up good. I used a non water proff servo with marine grease in it and it's holding up so far. Jethobby has a cheap water proff servo. Can check it out.

by exoskeletal on Tue 30 Jul 2013 - 17:02

Waterproof using ballons...thats a great idea...hmmm...apply marine grease around the moving parts? I noticed thats a rectangular hole in the body of the 540 motor..I just tape that up?

Pai seh ppl

by babyboy on Tue 30 Jul 2013 - 17:37

Marine grease in the gear box. I tried grease on moving parts, end up lots of dirt stick to grease. So lightly grease moving parts. Just leave the motor hole as it is.

by exoskeletal on Tue 30 Jul 2013 - 20:23

Hmmm maybe when I'm done I'll join u guys...but can I be excused the mud and water first? Haha...give chance to newbie la...

by boolean21 on Tue 30 Jul 2013 - 23:14

exoskeletal wrote:Hmmm maybe when I'm done I'll join u guys...but can I be excused the mud and water first? Haha...give chance to newbie la...

sure bro.. water and mud are not compulsory... no one will force you to go.... except for yourself...!
Twisted Evil

you will wanna dive into the mud and water...
Laughing

join in our meets soon!

by exoskeletal on Tue 30 Jul 2013 - 23:17

Haa..thanks for invite bro.. will be there once its ready...haha cheers!!

by boolean21 on Tue 30 Jul 2013 - 23:21

build thread build thread!!!
Twisted Evil

by Teck on Wed 31 Jul 2013 - 9:44

Hi bro u don't need to have a rig to come for the meet just join in and see what others have and maybe u can have a better idea on what u going to have or upgrade on your rig just Very Happy

by exoskeletal on Wed 31 Jul 2013 - 17:27

Haa..am completing my tundra soon...hope my showboat tundra can join u guys soon on ya next dirt thrashing session...

by exoskeletal on Sat 10 Aug 2013 - 13:09

Another noob question guys.. am looking to get the junfac 4 link suspension conversion kit..but it doesnt comes with shocks..what height of shocks should I get? Or is it depends on me how high I want my tundra to ride? Thanks ppl...haa

by Sponsored content

Hi all from Jurong Lakeside

Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Re: Hi all from Jurong Lakeside

Mon	Tue	Wed	Thu	Fri	Sat	Sun
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31