derrickwthip4 Tamiya CC01 Build

derrickwthip4 wrote:

Marpek wrote:

derrickwthip4 wrote:

Liew wrote:U can get 100mm shock from leadershobby only us4+ , cut the spring a bit , make it soft , then drill A hole mount the shock a bit front from original position !

Hey tks may consider this method Just nice my extra wraith stock shock length around 110mm will this method make the tire clearance n between the chassis gap bigger
U mention drill a hole n mount the shock forward, the hole daimeter is it around 3mm for mounting the shock

honestly speaking, the stock shock is rather fine as long as you keep the weight low and when the rear articulate it will bite the ground...

when i use my brat hard shell, it performs pretty well as can do some rock crawling... with the heavier landy is another issue. for the drop mode even if you use a stick with no springs as shocks also can, cos it will drop anyway when clearing obstacles. If you want it to bite the ground, add tonnes of weight in the wheels even better i think, tho i havent teied that out yet!

Hey tks for sharing ur info to me ;-) don't mind I use ur method ;-)
Ok about My pain job not really perfect from far look like Flower but near like shit need to do some touch up with paint brush from some corner Ha...Ha...

ShaiAX55 wrote:Hi bro, an excellent build and great finish to the cc01. Sorry to say this bro but i think your roof rack is too high. Lower it a little if u can and it will look 100% scale. Again, great job.