Axial SCX 10 3D Prints Solution

by vertigo.blues Fri 31 Jan 2014 - 9:05

Have been wanting to tidy up my Axial SCX10 wirings and finally today i laid my hands on it. The wirings are in a mess.
Axial SCX 10 3D Prints Solution P1070954-1024x575

Axial SCX 10 3D Prints Solution P1070954-1024x575

First part, working on a case with cover to keep the wirings in together with the switching controller, a BEC and LED controller.
Axial SCX 10 3D Prints Solution P1070953-1024x575

Axial SCX 10 3D Prints Solution P1070953-1024x575

Axial SCX 10 3D Prints Solution P1070960-1024x575

Wirings are in the bay now less the ESC and the receiver. The picture below is version 1 of the receiver+ESC stand. The final version is the last picture shown later in this post.
Axial SCX 10 3D Prints Solution P1070962-1024x575

Axial SCX 10 3D Prints Solution P1070962-1024x575

Now, working on the battery case solution. I need to offset the height for the battery case solution so i came out with a offset design as show below which serves 2 purposes, to offset the height and to secure the battery case.
Axial SCX 10 3D Prints Solution P1070964-1024x575

Axial SCX 10 3D Prints Solution P1070964-1024x575

Battery case mounted on the offset support.
Axial SCX 10 3D Prints Solution P1070965-1024x575

The final product. Pretty satisfied with the end result, now with the electronics mounted high above, lesser worries on water crossings till i get proper waterproofing done on the electronics.

Axial SCX 10 3D Prints Solution P1070968-1024x575

Axial SCX 10 3D Prints Solution P1070968-1024x575

Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30