Search
Who is online?
In total there are 9 users online :: 0 Registered, 0 Hidden and 9 Guests None
Most users ever online was 301 on Thu 21 Oct 2021 - 11:24
Latest topics
» RC Submarine: Russian Akula Class by redboat219 Tue 27 Sep 2022 - 11:43
» Land Rover Defender D90 photos and details only (picture intensive!)
by babyboy Fri 25 Jun 2021 - 16:39
» [Offroad Bashing and Rally] Offroad Bashing and Rally at Tampines Track 12 Jan 2020 - 0900hrs
by boolean21 Sat 11 Jan 2020 - 10:15
» [Scale Trail] Woodgrove Ave - Sunday 20 Oct 2019 0900hrs
by boolean21 Sat 19 Oct 2019 - 16:31
» vHOBBY RC videos
by CraftRC Fri 21 Jun 2019 - 21:32
» Suzuki Samurai 3D Printted project
by CraftRC Sat 4 May 2019 - 18:39
» WTS : Redcat Gen 7 Pro
by staypuft Mon 7 Jan 2019 - 11:31
» Hello all! Dan here
by csd8888 Fri 5 Oct 2018 - 8:27
» [Offroad Trails] Offroading at Tampines Quarry 16 Sep 2018 - 0900hrs
by boolean21 Sat 15 Sep 2018 - 18:41
» [Scale Trail] Woodgrove Ave - Sunday 12 Aug 2018 0900hrs
by boolean21 Sat 11 Aug 2018 - 22:51
» [Trail and Bash!] Woodgrove Ave - Sunday 22 Jul 2018 0900hrs
by boolean21 Sat 21 Jul 2018 - 19:39
» [Scale Trail] Woodgrove Ave - Sunday 01 Jul 2018 0900hrs
by boolean21 Sat 30 Jun 2018 - 20:39
» wts hobbywing esc + motor
by kelvintan_hc Thu 28 Jun 2018 - 15:36
» Axial roll cage crash
by CraftRC Fri 1 Jun 2018 - 20:16
» Jeep cherokee XJ crawling
by CraftRC Sat 26 May 2018 - 21:54
» Jeep cherokee XJ crawling
by CraftRC Sat 26 May 2018 - 21:54
» Extreme Rock Crawler Axial Wraith
by CraftRC Tue 8 May 2018 - 17:35
» [Scale Trail] Woodgrove Ave - Sunday 06 May 2018 0900hrs
by boolean21 Sat 5 May 2018 - 17:14
» Cab Land Rover Defender
by CraftRC Fri 4 May 2018 - 17:41
» Cab Land Rover Defender
by CraftRC Fri 4 May 2018 - 17:41
Most active topic starters
boolean21 | ||||
RTECH | ||||
gionata78 | ||||
laneboysrc | ||||
oceanic | ||||
Marpek | ||||
babyboy | ||||
ShaiAX55 | ||||
Wrigleys | ||||
Holdencars |
[Build Thread] Boolean21's NQD RC Jet Ski conversion from dual motor to jet drive
Page 1 of 1
[Build Thread] Boolean21's NQD RC Jet Ski conversion from dual motor to jet drive
[Build Thread] Boolean21's NQD RC Jet Ski conversion from dual motor to jet drive
Ordered this NQD Jet ski recently after bro MoveOn triggered an interest in this...
Had been wanting an RC Jet ski for a long time, finally a kaki emerged!
Bro MoveOn has a deeper poison.... he converted the NQD jet ski from 2 motor drive to jet drive!
Which inspired me to do the same for mine!
Thanks for the poison bro!
This is a photo of the NQD Jet ski before the mod...
The stock battery compartment
The stock counter-rotating props
Cutting up the battery compartment........
Tore out all the drive shafts,props, and all!
Bro MoveOn happens to have a spare set of the jet drive from the NDQ jet boat and I quickly bought it over from him.
He also mentioned something about "size of a 20cent coin" which I remembered vaguely... Indeed! So I used the 20cent coin to mark out the hole opening for the jet drive
And then.... cut it out with a penknife...
Test fitted nicely...
Installed the jet drive into the Jet ski....
And ran the hoses for water cooling...
Did you notice something weird in the above photos? I connected both the input and output hoses to the motor...
I guess it was getting late... hence the silly mistake.., which I only realised when I installed the ESC...
Added packing foam and bubble wraps into the bow of the jet ski.... just in case.....
Done!
Ready for water test this Saturday!
Thanks for watching!
Ordered this NQD Jet ski recently after bro MoveOn triggered an interest in this...
Had been wanting an RC Jet ski for a long time, finally a kaki emerged!
Bro MoveOn has a deeper poison.... he converted the NQD jet ski from 2 motor drive to jet drive!
Which inspired me to do the same for mine!
Thanks for the poison bro!
This is a photo of the NQD Jet ski before the mod...
The stock battery compartment
The stock counter-rotating props
Cutting up the battery compartment........
Tore out all the drive shafts,props, and all!
Bro MoveOn happens to have a spare set of the jet drive from the NDQ jet boat and I quickly bought it over from him.
He also mentioned something about "size of a 20cent coin" which I remembered vaguely... Indeed! So I used the 20cent coin to mark out the hole opening for the jet drive
And then.... cut it out with a penknife...
Test fitted nicely...
Installed the jet drive into the Jet ski....
And ran the hoses for water cooling...
Did you notice something weird in the above photos? I connected both the input and output hoses to the motor...
I guess it was getting late... hence the silly mistake.., which I only realised when I installed the ESC...
Added packing foam and bubble wraps into the bow of the jet ski.... just in case.....
Done!
Ready for water test this Saturday!
Thanks for watching!
Similar topics
» Need help on running dual brushed motor with single ESC setup
» [BUILD THREAD] Boolean21's Realacc x210 build diary
» [Build Thread] Boolean21's NQD Jet Boat Build
» Marpek's Second Kyosho HOR Build Thread
» Zax13's M chassis build thread
» [BUILD THREAD] Boolean21's Realacc x210 build diary
» [Build Thread] Boolean21's NQD Jet Boat Build
» Marpek's Second Kyosho HOR Build Thread
» Zax13's M chassis build thread
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum