Re: BabyBoy's Land Rover D110 on Axial SCX10

by RTECH Sat 2 Jun 2012 - 16:57

Nowadays a lot of DIY trucks. Built ! built ! built ! Chop ! chop! chop ! bounce

by babyboy Sat 2 Jun 2012 - 23:30

Is there another D110 in the house??? If so pls post... need to share info and advice. The D90 body is not easy to emulate.

by Liew Sun 3 Jun 2012 - 0:24

Ya ! Is not easy ! D110 on cc01 !
Tmr will post , now still thinking how to mod Suspect

by Chicano Sun 3 Jun 2012 - 13:22

Motto is changing from buy buy buy to extend extend extend lol

by babyboy Sun 3 Jun 2012 - 23:01

Wah Master is building. Mine cannot compare with him... mine is only entry level...

by babyboy Sun 24 Jun 2012 - 21:31

Some slow update. After several weeks thinking of how to put the D110 together.. here's what I got. Lots of mistake and improvement that I will avoid and implement for my second D110 build.

[url= d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060210

d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060210

Comparison with a D90
[url= d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060211

Lots more work that needs to be done.

by boolean21 Sun 24 Jun 2012 - 23:15

yeh yeh yeh! looking forward to more updates! Very Happy

by babyboy Sun 1 Jul 2012 - 23:42

Update over the weekend

Door
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060212

[/img]

Need to paint the inside... to hide the inperfection. Embarassed

Should have cut lower.
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060213

[/img]

Mounting door
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060214

[/img]

More work to be done... more putty and sanding will be next.
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060215

[/img]

My cheap tow hook that I will install to the rear... need more sanding to shape it.
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060216

[/img]

by boolean21 Mon 2 Jul 2012 - 0:17

looking good...
what putty you using for your project?
good?

by babyboy Mon 2 Jul 2012 - 1:28

boolean21 wrote:looking good...
what putty you using for your project?
good?

Tamiya white putty. Have to apply a few layer cos it keeps sinking in after it dried... Have not sand yet. Hope the putty will hold well, else one turn over my whole Landy crack. Laughing

by boolean21 Mon 2 Jul 2012 - 1:32

I see I see... Thanks for the info..
Hope my putty can last too. Razz

by babyboy Wed 11 Jul 2012 - 1:03

After a while this is what I got

Water sanding and more putty and more water sanding, clean dry and time for primer (sorry for the low quality, image from phone)

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 Img_1110

d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 Img_1110

[/img]

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 Img_1111

[/img]

After primer more water sanding and putty....

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060217

[/img]

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060218

[/img]

First layer of camel yellow... could not help myself and color the fender to see how it look like...

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060219

d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060219

[/img]

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060221

[/img]

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060222

[/img]

Will apply 2nd layer another day

by boolean21 Wed 11 Jul 2012 - 1:17

looking great!!!
nicely done!!

yeh! another D110 in the group! Very Happy

by wyetuck88 Wed 11 Jul 2012 - 1:28

looks good!!!

by babyboy Wed 11 Jul 2012 - 1:33

boolean21 wrote:looking great!!!
nicely done!!

yeh! a D110 in the group!

Thanks Bro. But my skill so so nia. From far looks OK but near... Embarassed

Hope my second one would be better. Still a long way to go. More work to be done on the body. Now thinking how to do the Roll bar and the carriers.

by babyboy Wed 11 Jul 2012 - 1:34

wyetuck88 wrote:looks good!!!

Thanks. Hope to get it up soon to join the trail.

by laneboysrc Wed 11 Jul 2012 - 7:07

Very, very nice! Love the color.

by babyboy Wed 11 Jul 2012 - 8:57

laneboysrc wrote:Very, very nice! Love the color.

Thanks laneboysrc. My skill is really not up to it... so hope the roof rack and roll cage will hide all this. Embarassed

. The yellow is deep yellow not like the real sandglow yellow.

by Liew Wed 11 Jul 2012 - 13:29

U built better than my 110 ! Lucky black can cover all !
Faster finish join the trail !

by boolean21 Wed 11 Jul 2012 - 13:48

babyboy wrote:
boolean21 wrote:looking great!!!
nicely done!!

yeh! a D110 in the group!

Thanks Bro. But my skill so so nia. From far looks OK but near... Hope my second one would be better. Still a long way to go. More work to be done on the body. Now thinking how to do the Roll bar and the carriers.

build build build!... Very Happy

your "handjob" is good man! Very Happy

by babyboy Wed 11 Jul 2012 - 22:51

Liew wrote:U built better than my 110 ! Lucky black can cover all !
Faster finish join the trail !

I also want to chiong.. but me really rookie. Not much oil to burn. I find it hard to build after sundown... cant really see clearly with artificial light. Your build is inovative!

by babyboy Wed 11 Jul 2012 - 23:05

boolean21 wrote:
babyboy wrote:
boolean21 wrote:looking great!!!
nicely done!!

yeh! a D110 in the group!

Thanks Bro. But my skill so so nia. From far looks OK but near... Hope my second one would be better. Still a long way to go. More work to be done on the body. Now thinking how to do the Roll bar and the carriers.

build build build!...
your "handjob" is good man!

Thanks. I still need to figure out how to mount the roof rack and role cage. Was wondering if can build the roof rack with styrene. As most D90 complaint top heavy. I still have to mount the spot lights and accessories. Will DIY a shovel and high lift jack and see how it comes out. Tried to buy a winch but looks like all no stock. Went down to sim lim to see if can find a suitable motor with gear to use for winch but came out empty...maybe i did not search hard enuf, so now will try DIY the winch using servo with 3kg torque and see how it goes... everything is still a question for me.

by babyboy Tue 17 Jul 2012 - 0:28

Update:

My lights arrived:
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060223

[/img]

Almost forgot the wheels:
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060224

[/img]

After a few hours, my wheel base:
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060226

[/img]

Rear link
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060227

[/img]

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060229

[/img]

Front link
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060228

[/img]

[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060230

[/img]

Chassis:
[img] d110 - BabyBoy's Land Rover D110 on Axial SCX10 - Page 2 P1060231

[/img]

Front and back uses 4 truss. This is so that I do not need to lenghten my drive shaft. The rear still have about 1cm contact. Will work on the hollow aluminium tubes to cover the 3mm treaded rod. More update after my roof rack is done up hopefully this week.

by boolean21 Tue 17 Jul 2012 - 0:45

Seems like ready to roll out soon! Very Happy

by babyboy Tue 17 Jul 2012 - 1:29

boolean21 wrote:Seems like ready to roll out soon!

Need to find out how to mount the body up without any screw to the body that can be seen from the outside, thats the best if can. Any suggestion? And where do you guys get your battery from? Looking for NiMh as I have the charger ored. So that I can roll out for test drive while pending other installation like bull bar, winch... that will take time too.

by boolean21 Tue 17 Jul 2012 - 1:35

I mount my landy body only using the 3holes at the rear mud flaps... the front is held on using velcro. I have a hinge at the rear.

Cheapest nimh in sg shd be from jethobby, got 2pcs when I started with my honcho last year... Smile

They are still my trusty swimming pals.... Very Happy

by babyboy Tue 17 Jul 2012 - 1:46

boolean21 wrote:I mount my landy body only using the 3holes at the rear mud flaps... the front is held on using velcro. I have a hinge at the rear.

Cheapest nimh in sg shd be from jethobby, got 2pcs when I started with my honcho last year...
They are still my trusty swimming pals....

Thanks for the tip. Will try it out. Been to JetHobby but dun seem to see NiMh around. Will ask the boss on my next visit. Thanks again.

by **Harakiri** Tue 17 Jul 2012 - 7:07

Jethobby don't sell the nimh batt already. Try street revo rc shop look for ethan they sell the 4500mah quite cheap bro. Nice job on the 110 built hope to see it soon as we r organizing a landy scale trail soon.

by laneboysrc Tue 17 Jul 2012 - 7:17

Looking awesome and almost done! I really like those rims and the color.

I would recommend painting the light buckets silver on the inside. I did that to ours and it looks so much better than leaving them black. Fiddly job though...

Looking forward to see this truck at a trail soon!

by babyboy Tue 17 Jul 2012 - 9:50

Harakiri wrote:Jethobby don't sell the nimh batt already. Try street revo rc shop look for ethan they sell the 4500mah quite cheap bro. Nice job on the 110 built hope to see it soon as we r organizing a landy scale trail soon.

Thanks for the info bro. Will get the NiMh there. Yes please, I would love to join the lady scale trail. I will buck up and put the pedal to the metal to fin this.

by Sponsored content

Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30